{
  "schema_version": "1.0",
  "publisher": "AI Release",
  "article": {
    "title": "TripoSR and TRELLIS.2 Failed 3D Printing: 9 Out of 20 Models Didn't Make It Through the Slicer",
    "canonical_url": "https://ai-release.org/posts/triposr-i-trellis-2-provalili-3d-pechat-9-iz-20-modeley-ne-proshli-sla-f8f81b88_en.html",
    "language": "en",
    "article_type": "news",
    "published_at": "2026-11-14T00:00:00+00:00",
    "updated_at": "2026-11-14T00:00:00+00:00"
  },
  "summary": "Artyom Kuznetsov ran 20 models from five photo-to-3D generators through Bambu Studio checks — nine didn't pass . TripoSR failed 4 out of 4, TRELLIS.2 — also 4 out of 4; Hunyuan3D 3.1 and SAM 3D Objects passed cleanly.",
  "topics": [
    "3D-печать",
    "neural networks",
    "TripoSR",
    "TRELLIS",
    "Bambu",
    "AI",
    "3Dпечать",
    "3Dмоделирование"
  ],
  "entities": [
    {
      "id": "E-SRC",
      "name": "habr.com",
      "type": "source",
      "description": "source domain",
      "url": "https://habr.com/ru/articles/1107774/"
    },
    {
      "id": "E-T1",
      "name": "3D-печать",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T2",
      "name": "neural networks",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T3",
      "name": "TripoSR",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T4",
      "name": "TRELLIS",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T5",
      "name": "Bambu",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T6",
      "name": "AI",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T7",
      "name": "3Dпечать",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-T8",
      "name": "3Dмоделирование",
      "type": "topic",
      "description": "publication tag",
      "url": null
    },
    {
      "id": "E-AIR",
      "name": "AI Release",
      "type": "publisher",
      "description": "published the article",
      "url": "https://ai-release.org/"
    }
  ],
  "claims": [
    {
      "id": "AR-TRIPOSRITR-001",
      "statement": "Artyom Kuznetsov ran 20 models from five photo-to-3D generators through Bambu Studio checks — nine didn't pass .",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-001",
      "evidence_excerpt": "Artyom Kuznetsov ran 20 models from five photo-to-3D generators through Bambu Studio checks — nine didn't pass ."
    },
    {
      "id": "AR-TRIPOSRITR-002",
      "statement": "TripoSR failed 4 out of 4, TRELLIS.2 — also 4 out of 4; Hunyuan3D 3.1 and SAM 3D Objects passed cleanly.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-002",
      "evidence_excerpt": "TripoSR failed 4 out of 4, TRELLIS.2 — also 4 out of 4; Hunyuan3D 3.1 and SAM 3D Objects passed cleanly."
    },
    {
      "id": "AR-TRIPOSRITR-003",
      "statement": "The test: four images from FLUX.1 [schnell], all generations via API, files used as-is without any touch-ups.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-003",
      "evidence_excerpt": "The test: four images from FLUX.1 [schnell], all generations via API, files used as-is without any touch-ups."
    },
    {
      "id": "AR-TRIPOSRITR-004",
      "statement": "Artyom Kuznetsov, an AI/ML engineer and CTO of a startup building AI technologies for 3D printing, put together a small but nasty test.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-004",
      "evidence_excerpt": "Artyom Kuznetsov, an AI/ML engineer and CTO of a startup building AI technologies for 3D printing, put together a small but nasty test."
    },
    {
      "id": "AR-TRIPOSRITR-005",
      "statement": "Four images from FLUX.1 [schnell], each targeting a known weakness of generators: a robot with separate shoulder pads, a thin antenna, and an open claw; a mug with a see-through handle and hollow interior; glasses with wire-thin frames; a dragon with wing membranes and spikes along its back.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-005",
      "evidence_excerpt": "Four images from FLUX.1 [schnell], each targeting a known weakness of generators: a robot with separate shoulder pads, a thin antenna, and an open claw; a mug with a see-through handle and hollow interior; glasses with wire-thin frames; a dragon with wing membranes and spikes along its back."
    },
    {
      "id": "AR-TRIPOSRITR-006",
      "statement": "There are five generators, and they build geometry in different ways.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-006",
      "evidence_excerpt": "There are five generators, and they build geometry in different ways."
    },
    {
      "id": "AR-TRIPOSRITR-007",
      "statement": "TripoSR (Stability AI and Tripo, 2024) — an open model using a triplane field, with surfaces assembled via marching cubes.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-007",
      "evidence_excerpt": "TripoSR (Stability AI and Tripo, 2024) — an open model using a triplane field, with surfaces assembled via marching cubes."
    },
    {
      "id": "AR-TRIPOSRITR-008",
      "statement": "TRELLIS (Microsoft) — a sparse voxel grid and FlexiCubes.",
      "claim_type": "reported_fact",
      "confidence": "not_assessed",
      "source_type": "publication source",
      "verification_status": "reported_unverified",
      "source_url": "https://habr.com/ru/articles/1107774/",
      "article_anchor": "#ai-claim-008",
      "evidence_excerpt": "TRELLIS (Microsoft) — a sparse voxel grid and FlexiCubes."
    }
  ],
  "relationships": [
    {
      "subject": "habr.com",
      "predicate": "reports on",
      "object": "TripoSR and TRELLIS.2 Failed 3D Printing: 9 Out of 20 Models Didn't Make It Through the Slicer",
      "claim_id": "AR-TRIPOSRITR-001"
    },
    {
      "subject": "AI Release",
      "predicate": "publishes",
      "object": "TripoSR and TRELLIS.2 Failed 3D Printing: 9 Out of 20 Models Didn't Make It Through the Slicer",
      "claim_id": "AR-TRIPOSRITR-001"
    }
  ],
  "questions_and_answers": [
    {
      "question": "What is this article about?",
      "answer": "TripoSR and TRELLIS.2 Failed 3D Printing: 9 Out of 20 Models Didn't Make It Through the Slicer. Artyom Kuznetsov ran 20 models from five photo-to-3D generators through Bambu Studio checks — nine didn't pass .",
      "claim_ids": [
        "AR-TRIPOSRITR-001"
      ],
      "article_anchor": "#ai-knowledge"
    },
    {
      "question": "What happened?",
      "answer": "Artyom Kuznetsov ran 20 models from five photo-to-3D generators through Bambu Studio checks — nine didn't pass . TripoSR failed 4 out of 4, TRELLIS.2 — also 4 out of 4; Hunyuan3D 3.1 and SAM 3D Objects passed cleanly. The test: four images from FLUX.1 [schnell], all generations via API, files used as-is without any touch-ups.",
      "claim_ids": [
        "AR-TRIPOSRITR-001",
        "AR-TRIPOSRITR-002",
        "AR-TRIPOSRITR-003"
      ],
      "article_anchor": "#ai-knowledge"
    },
    {
      "question": "Who is the source?",
      "answer": "habr.com: https://habr.com/ru/articles/1107774/",
      "claim_ids": [],
      "article_anchor": "#ai-knowledge"
    },
    {
      "question": "What remains unknown?",
      "answer": "The article reports the cited source; independent verification and full details are not provided.",
      "claim_ids": [],
      "article_anchor": "#ai-knowledge"
    }
  ],
  "limitations": [
    "No independent verification is provided.",
    "Full details, dates and official documents may be missing.",
    "The article reports a source rather than being the primary source."
  ],
  "citation": {
    "preferred_citation": "AI Release. «TripoSR and TRELLIS.2 Failed 3D Printing: 9 Out of 20 Models Didn't Make It Through the Slicer». 2026-11-14. https://ai-release.org/posts/triposr-i-trellis-2-provalili-3d-pechat-9-iz-20-modeley-ne-proshli-sla-f8f81b88_en.html",
    "canonical_url": "https://ai-release.org/posts/triposr-i-trellis-2-provalili-3d-pechat-9-iz-20-modeley-ne-proshli-sla-f8f81b88_en.html",
    "publisher": "AI Release"
  }
}