- A machine with an NVIDIA GPU and a working driver (nvidia-smi must print a table)
- The VividFrame-GPU build from the official distribution channel of your release — the exact package name, version and download URL are not covered by our source posts, so check the documentation
- FFmpeg and FFprobe (any recent build) for generating a test clip and verifying the result
- ~5 GB free disk space for the test clip, the build and model weights (verify the real size in the release notes)
- A terminal with sudo rights only if you must update the GPU driver
- Optional: a licence key or model token if your build requires one — the posts do not specify any, so check the documentation

nvidia-smi.nvidia-smi.Example: a clean Ubuntu 24.04 workstation with one NVIDIA card, FFmpeg from the distro repo, and a ~/vividframe working directory is enough for every command below.
Real-time upscaling is one part of a larger video-enhancement pipeline. If you also intend to interpolate frames or chain several models, read the pipeline overview in How to Enhance Video Quality with AI on a GPU first — it explains where the upscaler sits in the chain.
What to do: confirm the GPU is visible, create a working directory, and generate a small clip with known resolution and frame rate.
Why: every later failure — a driver that is too old, a wrong input path, a resolution mismatch — is easier to diagnose against a clip whose parameters you already know.
nvidia-smi
Expected output: a table with the driver version in the header (Driver Version: ...), the GPU name, and MiB / MiB memory usage. If the command is not found, the driver is missing — fix that before continuing.
mkdir -p ~/vividframe && cd ~/vividframe
ffmpeg -hide_banner -f lavfi -i testsrc2=size=640x360:rate=30:duration=10 \
-c:v libx264 -pix_fmt yuv420p -crf 18 sample_360p.mp4
How to check: probe the file you just made.
ffprobe -v error -select_streams v:0 \
-show_entries stream=width,height,r_frame_rate,nb_frames \
-of default=nw=1 sample_360p.mp4
Expected output:
width=640
height=360
r_frame_rate=30/1
nb_frames=300
Those four numbers are your baseline: 640×360 at 30 fps, 300 frames. Every verification later compares against them. Why this works: testsrc2 is generated by FFmpeg itself, so the file has no unknown variables — no variable frame rate, no odd pixel format.

What to do: install the build, then describe the job in a configuration file and start the pipeline against the test clip.
Why: a config file makes the run reproducible. You change one value (scale factor, model, device) instead of retyping a long command line, and you can diff two configs when the output looks wrong.
Install into an isolated environment so the build's CUDA and Python dependencies do not collide with the system packages:
cd ~/vividframe
python3 -m venv .venv
source .venv/bin/activate
pip install <vividframe-gpu-package> # exact name: check the documentation
vividframe --version # or: vividframe-gpu --version
If your build ships as an archive instead of a wheel, unpack it and put the binary on PATH:
tar -xzf vividframe-gpu-<version>-linux-x86_64.tar.gz -C ~/vividframe
export PATH="$HOME/vividframe/vividframe-gpu-<version>/bin:$PATH"
Example: vividframe --version printing a version string confirms that the binary starts and can load its shared libraries. If it prints nothing and exits with a non-zero code, jump to Troubleshooting.
Now write config.yaml in ~/vividframe:
input: /home/<user>/vividframe/sample_360p.mp4
output: /home/<user>/vividframe/sample_1080p.mp4
scale: 3 # 640x360 -> 1920x1080
model: <model-name> # from the release notes: check the documentation
device: cuda:0
precision: fp16 # keeps VRAM use down; check the docs for supported values
realtime: true # drop or pace frames instead of buffering the whole file
The key names above are the minimum a video pipeline needs — an input, an output, a scale factor and a device. Confirm the exact spelling of every key against the configuration reference, because unrecognised keys are usually ignored silently rather than rejected. All paths must be absolute: a relative path is resolved against the process working directory, not against the config file.
Start the run:
vividframe --config config.yaml --log-level info
How to check: watch the log during the first ten seconds. A healthy start prints the chosen device, the loaded model, the input resolution and a per-frame or per-second progress line. A failing start stops within a few seconds and prints an error — that is the case to take to Troubleshooting.
The real-time flag matters most when the source is a live feed rather than a file. The latency budget logic is the same one used in real-time voice changing with a virtual microphone: if processing one frame takes longer than one frame interval, the pipeline must drop frames or fall behind, and no buffer size fixes that.

What to do: probe the produced file, compare it with the input, and record how fast the pipeline actually ran.
Why: "it finished without errors" is not proof. The probe tells you whether the frame was actually upscaled, and the timing tells you whether real time is achievable on this card.
ffprobe -v error -select_streams v:0 \
-show_entries stream=width,height,r_frame_rate,nb_frames \
-of default=nw=1 sample_1080p.mp4
Expected output for the config above:
width=1920
height=1080
r_frame_rate=30/1
nb_frames=300
1920x1080 and 300 frames mean the scale factor and the frame count both survived the run. A correct resolution with a lower nb_frames means the pipeline dropped frames to keep up — expected with realtime: true, and a signal that the card is at its limit.
Measure wall-clock time and compare it with the clip duration (10 s):
/usr/bin/time -v vividframe --config config.yaml 2>&1 | grep -E "Elapsed|Maximum resident"
Divide the 300 frames by the elapsed seconds to get processing FPS. If processing FPS is at or above the source frame rate (30), the card can handle this resolution in real time; below it, reduce the scale factor or the model size. Record both numbers — this is the only measurement that answers "will it work live" for your hardware, and our source posts contain no benchmark figures to borrow.
Final check with your own eyes — play both files side by side for a few seconds:
ffplay -autoexit -window_title "input 360p" sample_360p.mp4 &
ffplay -autoexit -window_title "output 1080p" sample_1080p.mp4
Success looks like this: the second window is visibly sharper on the test pattern's text and diagonal edges, motion is smooth, and the log ends without warnings about dropped frames or CUDA errors. Close both windows before starting the next run.
Problem. The binary exits immediately after start
CUDA driver version is insufficient for CUDA runtime versionnvidia-smi | head -4
Problem. The process dies a few seconds into the run
CUDA out of memory. Tried to allocate ... MiBfp16, then process in smaller tiles if your build exposes a tile or batch setting (check the documentation for the exact key). Confirm the new peak with:nvidia-smi --query-gpu=memory.used,memory.total --format=csv -l 1
Problem. The run stops before the first frame
failed to open input: No such file or directoryconfig.yaml.ls -l /home/<user>/vividframe/sample_360p.mp4
You now have a reproducible pipeline: a known test clip, a config file that describes the job, and a probe-based check that proves the frame was upscaled. Next, replace sample_360p.mp4 with a real source, re-measure processing FPS, and only then decide whether the card can carry the job live.
Does VividFrame-GPU need an internet connection to upscale?
Only to download the build and its model weights. Inference itself runs on the local GPU; no API key is involved. If your build requires a licence or model token, the documentation names the environment variable.
Can it run in real time on a laptop GPU?
It depends on resolution, scale factor and model size — none of which our sources quantify. Run Step 3 on a short clip from the same laptop, compare processing FPS with the source frame rate, and lower the scale factor until processing FPS stays above it.
What is the difference between upscaling and frame interpolation?
Upscaling increases the pixel count in each frame; frame interpolation creates new frames between existing ones to raise the frame rate. They are separate stages and can be chained — see the GPU video enhancement guide for the ordering.
Why is the output frame count lower than the input frame count?
With realtime: true the pipeline paces itself to wall clock time and drops frames instead of falling behind. Turn the flag off for offline processing where every frame must be kept.
Status: practical guide. Some statements come from vendors; verify in your environment.
Time to complete: 20–30 minutes (driver update excluded) Difficulty: Intermediate
Machine data: Citation Map JSON · JSON-LD · Semantic Embeddings — separate stage.
| Entity | Type | Role |
|---|---|---|
| VividFrame-GPU установка | тема/инструмент | упоминается в заголовке, TL;DR или разделах гайда |
| апскейл видео на GPU в реальном времени | тема/инструмент | упоминается в заголовке, TL;DR или разделах гайда |
| VividFrame настройка | тема/инструмент | упоминается в заголовке, TL;DR или разделах гайда |
| видео энхансер на видеокарте | тема/инструмент | упоминается в заголовке, TL;DR или разделах гайда |
| Windows | платформа/технология | упоминается в заголовке, TL;DR или разделах гайда |
| Linux | платформа/технология | упоминается в заголовке, TL;DR или разделах гайда |
| GitHub | платформа/технология | упоминается в заголовке, TL;DR или разделах гайда |
| CUDA | платформа/технология | упоминается в заголовке, TL;DR или разделах гайда |
| Python | платформа/технология | упоминается в заголовке, TL;DR или разделах гайда |
| NVIDIA | компания | упоминается в заголовке, TL;DR или разделах гайда |
No independent confirmation is provided; source claims and editorial conclusions are separated below.
| Source | Type | Role |
|---|---|---|
| No external links | — | — |
Cite as: AI Release. Как установить VividFrame-GPU и настроить апскейл видео в реальном времени. ai-release.org.