← All guides AI Release
RU Subscribe to @ai_releaseorg

How to redact personal data in Android screenshots: installing and setting up tuomin

Updated: 18.11.2026 · AI Release · @ai_releaseorg
How to redact personal data in Android screenshots: installing and setting up tuomin

TL;DR

Requirements and setup

Illustration: Requirements and setup
Illustration: Requirements and setup

Checklist before you touch the phone:

# macOS / Linux — verify platform-tools is on PATH
adb version

Example: the output begins with Android Debug Bridge version followed by a build number. If you instead see bash: adb: command not found, add the platform-tools folder to PATH or call ./adb from inside it.

Step 1. Install tuomin and read its package name

What to do: install tuomin from its official listing, then read the exact package name from the phone instead of guessing it.

Why: every later command in this guide is addressed to a package name. A wrong name produces Error: Unknown package and sends you chasing a permissions problem that does not exist.

How to check: connect the phone, confirm it is visible, then list only third-party packages.

adb devices
adb shell pm list packages -3 | grep -i tuomin

Example: adb devices prints two columns — the serial and the state. The state must be device, not unauthorized or offline. The second command prints one line such as package:<vendor>.tuomin; <vendor> is whatever prefix the developer used.

If grep returns nothing, the app is not installed under a name containing "tuomin". Cross-check the package name from the store URL — the part after id= in https://play.google.com/store/apps/details?id=<vendor>.tuomin is the package name. Store builds and sideloaded APK builds can differ here, so always trust pm list packages over the URL.

Write the value down as <vendor>.tuomin; every command below uses this placeholder and you must substitute your real value.

Step 2. Grant media and notification access, then point tuomin at the screenshot folder

Illustration: Step 2. Grant media and notification access, then point tuomin at the screenshot folder
Illustration: Step 2. Grant media and notification access, then point tuomin at the screenshot folder

What to do: grant the runtime permissions tuomin needs, confirm them, and make sure the app watches the folder your phone actually writes screenshots into.

Why: since Android 10, apps use *scoped storage* — each app sees only the media it was granted, not the whole filesystem. A redaction app that cannot read the screenshot simply shows an empty list, and a redaction app that cannot see notifications cannot redact their previews. Detection usually runs on the device, which is the same idea as running an AI model locally on Android — nothing leaves the phone, but only if the permissions are correct.

First, find the screenshot directory. It is not the same on every vendor:

adb shell ls -d /sdcard/DCIM/Screenshots /sdcard/Pictures/Screenshots 2>/dev/null

Example: a Pixel prints /sdcard/Pictures/Screenshots; several other vendors print /sdcard/DCIM/Screenshots. Whichever line appears is the folder to select inside tuomin.

Grant media read access non-interactively:

adb shell pm grant <vendor>.tuomin android.permission.READ_MEDIA_IMAGES
adb shell dumpsys package <vendor>.tuomin | grep -A 20 "runtime permissions"

Example: the dumpsys output contains a line android.permission.READ_MEDIA_IMAGES: granted=true. If the permission is not declared by the app at all, pm grant prints Exception occurred while executing 'grant': java.lang.SecurityException: Package <vendor>.tuomin has not requested permission android.permission.READ_MEDIA_IMAGES — that means the build uses a different permission model and you must follow its documentation rather than this command.

Then, in the app itself:

1. Open tuomin → settings → screenshot folder / watch folder (label wording varies by build; if you cannot find it, check the documentation) and select the path you confirmed above.

2. Enable the redaction style. A solid fill (black box) is safer than blur, because blur can sometimes be reversed by an attacker; a solid box destroys the pixels.

3. If tuomin offers notification redaction, enable it and grant notification access in Settings → Apps → Special app access → Notification access.

adb shell settings get secure enabled_notification_listeners

Example: the output lists components separated by : — your new entry appears as <vendor>.tuomin/<vendor>.tuomin.NotificationListener. If the list does not change after you toggle the switch, the grant failed and you should re-open the toggle.

Step 3. Verify redaction with an OCR pass

Illustration: Step 3. Verify redaction with an OCR pass
Illustration: Step 3. Verify redaction with an OCR pass

What to do: take a screenshot of the fake note, pull the file, and run OCR (optical character recognition — a tool that turns pixels back into text) over it. If OCR can still read the fake name or number, the redaction failed.

Why: this is the only check that proves the data is gone rather than merely covered. Looking at the image yourself confirms nothing about what a machine can extract from it.

Take the screenshot with the phone's hardware buttons, then pull the newest file:

adb shell ls -t /sdcard/Pictures/Screenshots | head -n 1
adb pull /sdcard/Pictures/Screenshots/<newest-file>.png ./after-redaction.png
tesseract ./after-redaction.png stdout

Example: ls -t prints the newest filename first, for instance Screenshot_20240115-101500.png; substitute that exact name into adb pull. tesseract then prints the text it recovered from the image.

Pass criteria — all four must hold:

If OCR still returns the number, the app either processed a cached copy or your test image was never re-scanned. Delete the cached output file, take a fresh screenshot, and repeat the pull. Do not assume success from the app's own "done" toast.

Troubleshooting

Problem. The app lists no screenshots and the log shows a media permission failure

Problem. ADB cannot see the phone

Problem. New screenshots never appear inside tuomin

Summary and next steps

Repeat the OCR check after every app update, because permission defaults and folder paths can change silently. If you also want your financial screenshots to stay off third-party clouds entirely, the same privacy logic applies to self-hosting Actual Budget with Android sync.

FAQ

Does tuomin upload my screenshots to a server?

This guide cannot verify that. The checkable method is empirical: enable airplane mode, take a test screenshot, and confirm redaction still happens — if it does, processing is on-device. Confirm the rest in the app's privacy policy.

Which Android versions are supported?

The minimum version is stated on tuomin's store listing. If the listing omits it, treat it as unknown and check the documentation before installing.

Is blur good enough for hiding a phone number?

No. Some blurs can be partially reversed; a solid black box destroys the pixels, so use solid fill where the app offers it.

Can I redact a screenshot that already exists in the gallery?

It depends on the build. Import the file through the app's picker and re-run the OCR check from Step 3 to confirm it worked.

🤖 AI summary

AI Release Knowledge Layer
Machine-readable description · Version 1.0

Status: practical guide. Some statements come from vendors; verify in your environment.

1. Summary

Time to complete: about 15 minutes You need: an Android phone with Developer options enabled, a data-capable USB cable, ADB (Android Debug Bridge — a command-line tool that lets a computer send commands to the phone), the tuomin app, and one test screen filled with fake personal data

Inside: direct answers, key facts, entities, context, reliability, unknowns and sources.

Machine data: Citation Map JSON · JSON-LD · Semantic Embeddings — separate stage.

Full Knowledge Layer: sections 2–8

2. Direct answers

What is required?
Phone: any Android device that tuomin lists as supported. The minimum Android version is stated on the app's store listing — open the listing and read the "Requires" line before you start. If the listing does not state it, treat the version as unknown and check the app's documentation.; Computer: Windows, macOS or… → details (AR-GUIDE-KAKSKRYTPE-003)
How to do it?
Step 1. Install tuomin and read its package name → Step 2. Grant media and notification access, then point tuomin at the screenshot folder → Step 3. Verify redaction with an OCR pass → details (AR-GUIDE-KAKSKRYTPE-004)
Which topics does it cover?
как скрыть личные данные на скриншоте Android, tuomin скриншоты приложение, размыть персональные данные на скриншоте приложение → details (AR-GUIDE-KAKSKRYTPE-002)
What are the key points?
Time to complete: about 15 minutes You need: an Android phone with Developer options enabled, a data-capable USB cable, ADB (Android Debug Bridge — a command-line tool that lets a computer send commands to the phone), the tuomin app, and one test screen filled with fake personal data → details (AR-GUIDE-KAKSKRYTPE-007)

3. Key facts

  1. Time to complete: about 15 minutes — evidence; status: заявление источника.
  2. You need: an Android phone with Developer options enabled, a data-capable USB cable, ADB (Android Debug Bridge — a command-line tool that lets a computer send commands to the phone), the tuomin app, and one test screen filled with fake personal data — evidence; status: заявление источника.
  3. Phone: any Android device that tuomin lists as supported. The minimum Android version is stated on the app's store listing — open the listing and read the "Requires" line before you start. If the listing does not state it, treat the version as unknown and check the app's documentation. — evidence; status: заявление источника.
  4. Computer: Windows, macOS or Linux with platform-tools unpacked. Any current build of platform-tools works; you do not need Android Studio. — evidence; status: заявление источника.
  5. Cable: a data cable, not a charge-only one. Charge-only cables are the most common reason adb devices shows nothing. — evidence; status: заявление источника.

4. Entities

EntityTypeRole
как скрыть личные данные на скриншоте Androidтема/инструментупоминается в заголовке, TL;DR или разделах гайда
tuomin скриншоты приложениетема/инструментупоминается в заголовке, TL;DR или разделах гайда
размыть персональные данные на скриншоте приложениетема/инструментупоминается в заголовке, TL;DR или разделах гайда
Windowsплатформа/технологияупоминается в заголовке, TL;DR или разделах гайда
Linuxплатформа/технологияупоминается в заголовке, TL;DR или разделах гайда
macOSплатформа/технологияупоминается в заголовке, TL;DR или разделах гайда
Androidплатформа/технологияупоминается в заголовке, TL;DR или разделах гайда
Googleкомпанияупоминается в заголовке, TL;DR или разделах гайда

5. Context

  • Guide — describes → How to redact personal data in Android screenshots: installing and setting up tuomin (AR-GUIDE-KAKSKRYTPE-001).
  • Guide — includes step → Step 1. Install tuomin and read its package name (AR-GUIDE-KAKSKRYTPE-001).

6. Reliability

Confirmed

No independent confirmation is provided; source claims and editorial conclusions are separated below.

Source claims

  • Product features, versions, prices and limits come from vendors and the guide.
  • Commands and steps are recommendations, not guaranteed results.

AI Release analysis

  • Structure, comparison and selection criteria are editorial.
  • The guide does not replace an independent audit or legal advice.

7. Unknowns

  • Current versions, prices and limits.
  • Independent benchmarks and quality checks.
  • Terms of use and data policy.

8. Sources

SourceTypeRole
play.google.comвнешний источникссылка из тела гайда

Cite as: AI Release. Как скрыть персональные данные на скриншотах Android: установка и настройка tuomin. ai-release.org.